ECA 450 Industrial Emission Analyzer
ECA 450 Industrial Emission Analyzer Emission & Flue Gas Analyzer Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam Supplier, Suppliers, Supply, Supplies | Precizion Tools ECA 450 Industrial Emissions Analyzer
11.500 KG
Quantity
A combustion efficiency and environmental analyzer
  • Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles
  • Sensors are easily replaced or upgraded in the field
  • Rugged suitcase design with large, easy-to-read display
  • Built-in printer for instant traceability and record-keeping

Description

The ECA 450 is an industrial grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning safely and efficiently.

The ECA 450 is designed for on-demand or semi-continuous sampling of industrial furnaces, boilers and other industrial combustion equipment. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030 and state/local protocols including SCAQMD.
 

Specifications

Measurements:

O2

CO (low-range, H2 compensated)

CO (high-range, optional)

NO (optional)

NO2 (optional)

SO2 (optional)

Combustibles (optional)

Stack temperature

Primary/ambient air temperature

Draft/differential pressure



0 to 20.9%

0 to 4000 ppm

4001 to 80,000 ppm

0 to 3500 ppm

0 to 500 ppm

0 to 4000 ppm

0 to 5% vol. (application dependent)

-4 to 2400°F (-20 to 1215°C)

-4 to 999°F (-20 to 537°C)

27.7 inH2O(±69 mbar)

Power

Internal rechargeable battery or via supplied wall adapter

Run Time

8 hours minimum

Size (H x W x D)

13.5 x 18.5 x 9 in. (34.3 x 47.0 x 22.9 cm)

Weight

25 lb. (11.3 kg)

Fuels[1]

Natural gas, coal, oil 2/4/5/6, wood, kerosene, bagasse, propane, LPG, KOKS, LEG, biofuel

Operating Conditions

Analyzer: 32 to 104 °F (0 to 40 °C), 15 to 90% RH (non-condensing), 1 ATM ± 10%

Probe tip[2]: 1472 °F (800 °C) maximum, 10 inH2O (25 mbar) maximum draft

Warm-up Time

60 seconds

Memory

1000 locations

Communications

RS-232

Approvals

CE mark

Warranty

1 year (including sensors)

[1] Depending upon combustion equation type – see manual for details

[2] For standard 12 in. probe, P/N 0024-3023


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version